BTMYJ - MIL-P-15929C F-119D, F-02P03

Product Identification

Product ID:MIL-P-15929C F-119D, F-02P03
MSDS Date:11/14/1990
FSC:8010
NIIN:00-285-4865
MSDS Number: BTMYJ

Responsible Party
SEAGRAVE COATINGS CORP OF VA
4030 SEAGUARD AVENUE
PORTSMOUTH, VA 23701
US

Emergency Phone: 804-488-4411

Info Phone: 804-488-4411

Cage: 60163

Contractor
SHERWIN-WILLIAMS, SEAGUARD
PORTSMOUTH, VA 23704 US

Telephone: 757-397-2223

Cage: 60163

Ingredients

54@20C

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <25%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


83@20C

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <5%

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE). VP

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: <30%

OSHA PEL 50 PPM;75 PPM STEL

ACGIH TLV: 50 PPM;75 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


LEAD TETROXIDE; (LEAD TETRAOXIDE) (RED LEAD)

CAS: 1314-41-6

RTECS: OG5425000

Fraction By Weight: <15%

OSHA PEL 0.15 MG/M3 (MFR)

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRITATION TO
RESPIRATORY TRACT, HEADACHE, DIZZINESS & NAUSEA. SKIN: PRIMARY
IRRITATION. EYE: PRIMARY IRRITATION. NOTE: TOLUENE APPEARS ON NAVY
LIST OF OCCUP CHEM REPROD HAZS. SEEK CONSU LTATION FROM APPROP HLTH
PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE HNDLG & EXPOS
INFO .
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING SENSITIVITY TO SOLVENTS
CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS PRODUCT.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT A
PHYSICIAN. SKIN: FLUSH WITH WATER. EYE: FLUSH IMMED WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CONSULT A PHYSICIAN.
INGEST: CALL MD I MMED .

Fire Fighting

Flash Point Method:TCC
Flash Point:25.0F,-3.9C
Lower Limits:1.2%
Upper Limits:7.5%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, WATER FOG,
ALCOHOL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.WATER
MAY BE USED TO COOL CLSD CONTRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, SPARKS, AND OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:AVOID BREATHING SOLVENT VAPOR. ENSURE ADEQUATE
VENTILATION. AVOID SPARKS, FLAMES, AND ANYTHING WHICH COULD CAUSE
FIRE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS.
Other Precautions:PROVIDE RESPIRATORY PROTECTION AGAINST FUMES
GENERATED DURING BURNING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD RESP TYPES SUITABLE FOR MATLS
IS RECOM. NIOSH/MSHA APPRVD CHEM/MECH FILTERS RECOM WHEN VENT IS
RESTRICTED. NIOSH/MSHA APPRVD AIRLINE TYPE RESP/HOODS RECOM IN
CONFINED AREAS.
Ventilation:SUFFICIENT VENT, IN VOL & PATTER, SHOULD BE PROVIDED TO
KEEP AIR CONTAM BELOW CURRENT APPLIC OSHA PERMISSIBLE(SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APVD CHEM SFTY GOG & FULL (SUPDAT)
Other Protective Equipment:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY. REMOVE AND WASH CONTAMD CLTHG BEFORE REUSE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN
DESIGNATED AREAS ONLY.
Supplemental Safety and Health
VENT: EXPOS LIM OR ACGIH'S TLV LIMIT. EYE PROT: LENGTH FACESHIELD .

Chemical Properties

Boiling Pt:B.P. Text:>175F,>79C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.17
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:RED LIQUID, KETONE SOLVENT ODOR
Percent Volatiles by Volume:82.6

Stability

Stability Indicator/Materials to Avoid:YES
AS WITH ANY OTHER ORGANIC MATERIALS, COMBUSTION WILL PRODUCE CARBON
DIOXIDE AND PROBABLY CARBON MONOXIDE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDIZING MATERIALS CAN CAUSE A
VIGOROUS REACTION.

Disposal

Waste Disposal Methods:SOAK LIQUIDS W/SAWDUST/RAGS AND REMOVE. FLUSH
W/WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD BE I/A/W
LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.